Name: Hitron CGNV4
Brand: Hitron
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Hitron CGNV4 User’s Guide

The following table describes the labels in this screen.

2.3 The DOCSIS Provisioning Screen

This screen displays the steps successfully taken to connect to the Internet over the

Cable connection.

Use this screen for troubleshooting purposes to ensure that the CGNV4 has

successfully connected to the Internet; if an error has occurred you can identify the

stage at which the failure occurred.Click Status > DOCSIS Provisioning. The

following screen displays.

Table 8: The Status: System Information Screen

Hardware Version This displays the version number of the CGNV4’s

physical hardware.

Software Version This displays the version number of the software that

controls the CGNV4.

Gateway Serial Number This displays a number that uniquely identifies the

device.

HFC MAC Address This displays the Media Access Control (MAC) address

of the CGNV4’s Hybrid-Fiber Coax (HFC) module. This

is the module that connects to the Internet through the

CATV connection.

System Time This displays the current date and time.

WAN IP This displays the CGNV4’s WAN IP address. This IP

address is automatically assigned to the CGNV4

WAN Receiving This displays the amount of data received over the WAN

connection since the device was last started.

WAN Sending This displays the amount of data transmitted over the

WAN connection since the device was last started.

Private LAN IPv4 Subnet This displays the CGNV4’s LAN subnet mask.

LAN Receiving This displays the amount of data received over the LAN

connection since the device was last started.

LAN Sending This displays the amount of data transmitted over the

LAN connection since the device was last started.

Hitron CGNV4 User Manual

Other manuals for Hitron CGNV4