Version 1.1, 02/2014. Copyright 2012 Hitron Technologies
96
Version 1.1, 02/2014. Copyright 2014 Hitron Technologies
96
Hitron CGNV4 User’s Guide
Figure 36: The Security: Service Filter Trusted Device Add/Edit Screen
The following table describes the labels in this screen.
6.4 The Device Filter Screen
Use this screen to configure Media Access Control (MAC) address filtering on the
LAN, and to configure IP filtering.
NOTE: To configure MAC address filtering on the wireless network, see The
Wireless Access Control Screen on page 75.
Click Security > Device Filter. The following screen displays.
Table 35: The Security: Service Filter Trusted Device Add/Edit Screen
Host Name Enter a name to identify the device.
MAC Address Enter the Media Access Control (MAC) address of the
device.
Rule Status Use this field to define whether the trusted device rule
should be active or not.
Select Enabled to activate the trusted device rule.
Select Disabled to deactivate the trusted device
rule.
Apply Click this to save your changes to the fields in this
screen.
Close Click this to return to the Service Filter screen without
saving your changes to the rule.
To Next Page
Loading...
Need help?
General
