Hitron CGNV4 User Manual

Version 1.1, 02/2014. Copyright 2012 Hitron Technologies
48
Version 1.1, 02/2014. Copyright 2014 Hitron Technologies
48
Hitron CGNV4 User’s Guide
3.3 The Gateway Function Screen
Use this screen to enable or disable the CGNV4’s residential gateway and Universal
Plug n Play (UPnP) functions.
DHCP Start IP Use this field to specify the IP address at which the
CGNV4 begins assigning IP addresses to devices on
the LAN (when DHCP is enabled).
DHCP End IP Use this field to specify the IP address at which the
CGNV4 stops assigning IP addresses to devices on the
LAN (when DHCP is enabled).
NOTE: Devices requesting IP addresses once the
DHCP pool is exhausted are not assigned an IP
address.
Save Click this to save your changes to the fields in this
screen.
Cancel Click this to return the fields in this screen to their last-
saved values without saving your changes.
Help Click this to see information about the fields in this
screen.
Connected Computers
Host Name This displays the name of each network device
connected on the LAN.
IP Address This displays the IP address of each network device
connected on the LAN.
MAC Address This displays the Media Access Control (MAC) address
of each network device connected on the LAN.
Type This displays whether the device’s IP address was
assigned by DHCP (DHCP-IP), or self-assigned.
Interface This displays whether the device is connected on the
LAN (Ethernet) or the WLAN (Wireless(x), where x
denotes the wireless mode; b, g or n).
Status This displays Active when the connected computer is
online, and Inactive when the connected computer is
offline.
Table 13: The Basic: LAN Setup Screen (continued)

Hitron CGNV4 Specifications

General

Wi-Fi Standard	802.11n
Frequency Bands	2.4 GHz, 5 GHz
Ethernet Ports	4
USB Ports	1
DOCSIS Version	3.0
Downstream Channels	24
Upstream Channels	8
Type	Cable Modem Router
Max Download Speed	960 Mbps
Max Upload Speed	240 Mbps
Security Features	WPA, WPA2
Wi-Fi Frequency	2.4 GHz