Version 1.1, 02/2014. Copyright 2012 Hitron Technologies
51
Version 1.1, 02/2014. Copyright 2014 Hitron Technologies
51
Hitron CGNV4 User’s Guide
3.4.1 Adding or Editing a Port Forwarding Rule
To add a new port forwarding rule, click Add in the Basic > Port Forwarding
screen.
To edit an existing port forwarding rule, select the rule’s radio button in the Basic
> Port Forwarding screen and click the Edit button.
NOTE: Ensure that Enabled is selected in the Basic > Port Forwarding screen in
order to add or edit port forwarding rules.
Protocol This field displays the protocol or protocols to which this
rule applies:
Transmission Control Protocol (TCP)
User Datagram Protocol (UDP)
Transmission Control Protocol and User Datagram
Protocol (TCP/UDP)
Generic Routing Encapsulation (GRE)
Encapsulating Security Protocol (ESP)
Local IP Address This displays the IP address of the computer on the LAN
to which traffic conforming to the Public Port Range
and Protocol conditions is forwarded.
Status Use this to turn the port forwarding rule on or off.
Select ON to activate the port forwarding rule.
Select OFF to deactivate the port forwarding rule.
Add Click this to define a new port forwarding rule. See
Adding or Editing a Port Forwarding Rule on page 51 for
information on the screen that displays.
Edit Select a port forwarding rule’s radio button and click this
to make changes to the rule. See Adding or Editing a
Port Forwarding Rule on page 51 for information on the
screen that displays.
Delete Select a port forwarding rule’s radio button and click this
to remove the rule. The deleted rule’s information
cannot be retrieved.
Help Click this to see information about the fields in this
screen.
Table 15: The Basic: Port Forwarding Screen (continued)