Version 1.1, 02/2014. Copyright 2012 Hitron Technologies
18
Version 1.1, 02/2014. Copyright 2014 Hitron Technologies
18
Hitron CGNV4 User’s Guide
1.3 LEDs
This section describes the CGNV4’s LEDs (lights).
CABLE Use this to connect to the Internet via an F-type RF
cable.
POWER Use the POWER port to connect to the 12v/2A power
adapter that came with your CGNV4. Use the POWER
switch to turn the CGNV4 on or off.
NEVER use another power adapter with your
CGNV4. Doing so could harm your CGNV4.
Figure 3: Power Adaptor
Table 2: Hardware Connections
To Next Page
Loading...
