Version 1.1, 02/2014. Copyright 2012 Hitron Technologies
82
Version 1.1, 02/2014. Copyright 2014 Hitron Technologies
82
Hitron CGNV4 User’s Guide
Figure 28: The Admin: Diagnostics Screen
The following table describes the labels in this screen.
5.4 The Backup Screen
Use this screen to back up your CGNV4’s settings to your computer or load settings
from a backup you created earlier.
Click Admin > Backup. The following screen displays.
Table 28: The Admin: Diagnostics Screen
Destination (IP or
Domain)
Enter the IP address or URL that you want to test.
Ping Select the type of test that you want to run on the
Destination that you specified.
Traceroute
Result This field displays a report of the test most recently
performed.
Cancel Click this to terminate a test in progress.
To Next Page
Loading...
