Hitron CGNV4 User Manual

Version 1.1, 02/2014. Copyright 2012 Hitron Technologies
57
Version 1.1, 02/2014. Copyright 2014 Hitron Technologies
57
Hitron CGNV4 User’s Guide
3.6 The DMZ Screen
Use this screen to configure your network’s Demilitarized Zone (DMZ).
NOTE: Only one device can be on the DMZ at a time.
Click Basic > DMZ. The following screen displays.
Figure 19: The Basic: DMZ Screen
Protocol Use this field to specify whether the CGNV4 should
activate this trigger when it detects activity via:
 Transmission Control Protocol (TCP)
 User Datagram Protocol (UDP)
 Transmission Control Protocol and User Datagram
Protocol (Both)
NOTE: If in doubt, leave this field at its default (Both).
Timeout (ms) Enter the time (in milliseconds) after the CGNV4 opens
the Target ports that it should close them.
Apply Click this to save your changes to the fields in this
screen.
Close Click this to return to the Port Triggering screen without
saving your changes to the rule.
Table 18: The Basic: Port Triggering Add/Edit Screen

Hitron CGNV4 Specifications

General

Wi-Fi Standard	802.11n
Frequency Bands	2.4 GHz, 5 GHz
Ethernet Ports	4
USB Ports	1
DOCSIS Version	3.0
Downstream Channels	24
Upstream Channels	8
Type	Cable Modem Router
Max Download Speed	960 Mbps
Max Upload Speed	240 Mbps
Security Features	WPA, WPA2
Wi-Fi Frequency	2.4 GHz