Version 1.1, 02/2014. Copyright 2012 Hitron Technologies
56
Version 1.1, 02/2014. Copyright 2014 Hitron Technologies
56
Hitron CGNV4 User’s Guide
Figure 18: The Basic: Port Triggering Add/Edit Screen
The following table describes the labels in this screen.
Table 18: The Basic: Port Triggering Add/Edit Screen
Application Name Enter a name for the application for which you want to
create the rule.
NOTE: This name is arbitrary, and does not affect
functionality in any way.
Trigger Port Range Use these fields to specify the trigger ports. When the
CGNV4 detects activity on any of these ports originating
from a computer on the LAN, it automatically opens the
Target ports in expectation of incoming traffic.
Enter the start port number in the first field, and the end
port number in the second field.
To specify only a single port, enter its number in both
fields.
Target Port Range Use these fields to specify the target ports. The CGNV4
opens these ports in expectation of incoming traffic
whenever it detects activity on any of the Trigger ports.
The incoming traffic is forwarded to these ports on the
computer connected to the LAN.
Enter the start port number in the first field, and the end
port number in the second field.
To specify only a single port, enter its number in both
fields.
To Next Page
Loading...
Need help?
General
