Version 1.1, 02/2014. Copyright 2012 Hitron Technologies
64
Version 1.1, 02/2014. Copyright 2014 Hitron Technologies
64
Hitron CGNV4 User’s Guide
Push-Button Configuration (PBC): when the user presses the PBC button on
the AP (either a physical button, or a virtual button in the GUI), any user of a
wireless client that supports WPS can press the corresponding PBC button on
the client within two minutes to join the network.
Personal Identification Number (PIN) Configuration: all WPS-capable
devices possess a PIN (usually to be found printed on a sticker on the device’s
housing). When you configure another device to use the same PIN, the two
devices authenticate with one another.
Once authenticated, devices that have joined a network via WPS use the WPA2
security standard.
4.1.6 WMM
WiFi MultiMedia (WMM) is a Quality of Service (QoS) enhancement that allows
prioritization of certain types of data over the wireless network. WMM provides four
data type classifications (in priority order; highest to lowest):
Voice
Video
Best effort
Background
If you wish to improve the performance of voice and video (at the expense of other,
less time-sensitive applications such as Internet browsing and FTP transfers), you
can enable WMM. You can also edit the WMM QoS parameters, but are disadvised
to do so unless you have an extremely good reason to make the changes.
4.2 The Wireless Basic Settings Screen
Use this screen to configure your CGNV4’s basic 2.4GHz and 5GHz wireless
settings. You can turn the wireless modules on or off, select the wireless mode and
channel, and configure the wireless networks’ SSID settings.
The CGNV4 has separate 2.4GHz and 5GHz wireless networks:
To Next Page
Loading...
Need help?
General
