Version 1.1, 02/2014. Copyright 2012 Hitron Technologies
54
Version 1.1, 02/2014. Copyright 2014 Hitron Technologies
54
Hitron CGNV4 User’s Guide
Figure 17: The Basic: Port Triggering Screen
The following table describes the labels in this screen.
Table 17: The Basic: Port Triggering Screen
All Port Triggering
Rules
Use this field to turn port triggering on or off.
Select Enabled to turn port triggering on.
Select Disabled to turn port triggering off.
Port Triggering Rules
Select Select a port forwarding rule’s radio button before
clicking Edit or Delete.
# This displays the arbitrary identification number
assigned to the port forwarding rule.
Application Name This displays the name you assigned to the rule when
you created it.
Trigger This displays the range of outgoing ports. When the
CGNV4 detects activity (outgoing traffic) on these ports
from computers on the LAN, it automatically opens the
Target ports.
Target This displays the range of triggered ports. These ports
are opened automatically when the CGNV4 detects
activity on the Trigger ports from computers on the
LAN.
Protocol This displays the protocol of the port triggering rule
(TCP, UDP or Both).
To Next Page
Loading...
Need help?
General
