Version 1.1, 02/2014. Copyright 2012 Hitron Technologies
69
Version 1.1, 02/2014. Copyright 2014 Hitron Technologies
69
Hitron CGNV4 User’s Guide
The following table describes the labels in this screen.
Table 22: The Wireless: Basic Settings 5GHz Screen
Basic Settings
Wireless Enabled Use this field to turn the 5GHz wireless network on or
off.
Select ON to enable the wireless network.
Select OFF to disable the wireless network.
Wireless Mode Select the type of 5GHz wireless network that you want
to use:
802.11 11n 5G: use IEEE 802.11n (5GHz)
802.11 11a: use IEEE 802.11a
802.11 B/G/N Mixed: use IEEE 802.11a and
802.11n
802.11 11ac: use IEEE 802.11ac (5GHz only)
NOTE: Only wireless clients that support the network
protocol you select can connect to the wireless
network. If in doubt, use 11B/G/N Mixed.
Channel Bandwidth This field allows you to configure the width of the radio
channel the CGNV4 uses to communicate with its
wireless clients. Using the full 40MHz bandwidth can
double your data speed.
Select 20 MHz to only use a 20 megahertz band.
Select 40 MHz to only use a 40 megahertz band.
Select 80 MHz to only use a 80 megahertz band.
Wireless Channel Select the 5GHz wireless channel that you want to use,
or select Auto to have the CGNV4 select the optimum
channel to use.
NOTE: Use the Auto setting unless you have a specific
reason to do otherwise.
To Next Page
Loading...
Need help?
General
