Version 1.1, 02/2014. Copyright 2012 Hitron Technologies
92
Version 1.1, 02/2014. Copyright 2014 Hitron Technologies
92
Hitron CGNV4 User’s Guide
The following table describes the labels in this screen.
Table 33: The Security: Service Filter Screen
Managed Services
Filter Enabled Use this field to turn service filtering on or off.
Select Enabled to turn service filtering on.
Select Disabled to turn service filtering off.
App Name This displays the name you assigned to the filtering rule
when you created it.
Protocol This field displays the protocol or protocols to which this
filtering rule applies:
Transmission Control Protocol (TCP)
User Datagram Protocol (UDP)
Port Range This displays the start and end port for which this
filtering rule applies.
Managed Weekdays This displays the days of the week on which this rule
applies.
Managed Time This displays the start (From) and end (To) of the time
period during which this rule applies, on the specified
Managed Weekdays.
Action Click Manage to make changes to a filtering rule (see
Adding or Editing a Service Filter Rule on page 93).
Add Managed Service Click this to add a new service filtering rule (see Adding
or Editing a Service Filter Rule on page 93).
Trusted PC List
Host Name This displays the arbitrary name of each trusted PC you
configured.
MAC Address This displays the Media Access Control (MAC) address
of each trusted PC. Every network device has a MAC
address that uniquely identifies it.
Status This displays whether the device is currently trusted
(Enabled) or untrusted (Disabled).
Manage Click Manage to make changes to the trusted device
rule. See Adding or Editing a Service Filter Trusted
Device Rule on page 95 for information on the screen
that displays.
Action Click Delete to remove the trusted device rule.
To Next Page
Loading...
Need help?
General
