Version 1.1, 02/2014. Copyright 2012 Hitron Technologies
98
Version 1.1, 02/2014. Copyright 2014 Hitron Technologies
98
Hitron CGNV4 User’s Guide
Managed Devices
Block Rules Use these buttons to control the action to be taken for
the devices listed:
Select Allow All to ignore the Managed Devices
list and let all devices connect to the CGNV4.
Select Allow Listed to permit only devices you
added to the Managed Devices list to access the
CGNV4 and the network. All other devices are
denied access.
Select Deny to permit all devices except those you
added to the Managed Devices list to access the
CGNV4 and the network. The specified devices
are denied access.
Host Name This displays the name of each network device in the
list.
MAC Address This displays the Media Access Control (MAC) address
of each network device in the list.
Managed Weekdays This displays the days of the week on which the device
is managed.
Managed Time This displays the start (From) and end (To) of the time
period during which the device is managed, on the
specified Managed Weekdays.
Action Click Manage to make changes to a managed device
rule (see Adding or Editing a Managed Device on page
99).
Add Managed Device Click this to add a new managed device rule (see
Adding or Editing a Managed Device on page 99).
Save Changes Click this to save your changes to the fields in this
screen.
Cancel Click this to return the fields in this screen to their last-
saved values without saving your changes.
Help Click this to see information about the fields in this
screen.
Table 36: The Security: Device Filter Screen (continued)
To Next Page
Loading...
Need help?
General
