PANEL
Wireless
- Easy to use install menu for wireless (RF) devices
- Devices include wireless...
- Up to 70 wireless detectors (Contact/Inertia Sensors, Quad-PIR’s, PA Buttons
Smoke Sensors, Heat Sensors & CO Sensors)
- 1 wireless Keypad
- Up to 2 wireless Internal Sirens and 2 wireless External Sirens
- Up to 32 wireless Key-fobs and 32 prox. tags mapped to Users
- Comprehensive RF device status menu (inc. signal strength & battery
capacity)
Zone
- Capable of analysing Inertia Sensor
- Dedicated alarm & tamper terminals
- Programmable zone & Point ID descriptions
- Programmable zone wiring types; non EOL, single EOL & dual EOL loops.
- Expandible to 10 wired ID sensors
- All ID modules with dedicated alarm & tamper terminals
Outputs
- 2 high current outputs - Bell & Strobe
Dialler
- Reports to Central Stations on 16 Fast Format channels
- Other protocols; SIA, Extended SIA & Contact ID
- Can also send voice messages to 4 phones
- Reports to 5 SMS text compatible phones
- Built-in DSL Filter
- Supports SmartLink7 high-speed upload/download
Other Features
- Resettable fuses
- Battery current monitoring and load test
- Enhanced engineer log; 999 events
- 2 block areas + 1 common area
- 2 part-set areas per block with programmable descriptions and timers
- 2 serial ports and 1 USB (mini - B) port
- Graphics LCD
- Audible word library
- 32 Users (max.); programmable user descriptions & options
- Built-in panic feature; pressing * and # buttons simultaneously
- Proximity tag feature available
Contact/Inertia Sensor, PIR, PIRCAM, DualTech,
Keypad, Smoke Sensor, Heat Sensor, CO Sensor, PA Button, Internal Siren,
External Siren and Key-fob
The Quantum 70 control panel comes with on-board SecureWave 2-way
wireless technology. It can handle 70 wireless detectors and has 1 wired zone (which
can be expanded to 10 wired Point ID zones). The following features have been
included in the panel....
Quantum 70 Overview
3
Default Eng. Code - 4567 Default User Code - 1111 (Irl) 1234 (UK)
To Next Page
Loading...
Need help?
General
