79
Default Eng. Code - 4567 Default User Code - 1111 (Irl) 1234 (UK)
Comms Menu - Continued
931 PHONE MENU
1 PHONE NUMBERS
2 PHONE ACCOUNTS
3 PHONE PROTOCOLS
Phone Numbers is where you key-in the phone numbers that
the digi will contact in the event of an alarm, fault etc. 16 digits
can be programmed for each phone number. The NO key will
clear numbers.
Phone Accounts is where you key-in the account number
issued by the monitoring centre. 6 digits can be programmed
for each account number. The NO key will clear numbers.
Depending on the equipment used by your monitoring centre,
you can select the appropriate format to communicate with it.
Each phone number can be individually programmed with the
Fast Format, SIA, Extended SIA or Contact ID protocols.
Alternatively, by selecting the Voice protocol, you can send
voice messages to the key-holders’ phones instead. In this
instance you should go to Rec. Site Name in the Voice Site
Name menu where you will be prompted to record the site’s
name instead. You can have 8 sec. of message.
Note: There is no need for an account number with voice protocol.
!
93 MONITORING & VOICE
To Next Page
Loading...
Need help?
General
