Comms Menu - Continued
954 REMOTE USER PHONES
Remote User Phones; each remote user can have their
phone number programmed into the system. This number
must be programmed to allow the system...
1) Recognise Caller ID in order to call back Smartlink700
2) Recognise Caller ID in order to answer an incoming call and
finally...
3) Call Smartlink700 as a result of the 0*3 quick key option.
96 PANEL PRINT MENU
961 PRINT ENGINEER LOG
With the Print Engineer Log command, the contents of the
Engineer Log can be printed out using a serial printer
connected to J5 on the Quantum 70 and SP1 or SP2 on the
SW-10270 control panel.
Default Eng. Code - 4567 Default User Code - 1111 (Irl) 1234 (UK)
962 PRINTER OPTIONS
Printer Options; there are 2 options. One is Real Time Log
which, if selected, prints out each item as it is logged to the
Engineer Log.
The other is Use Form Feed; the last page of a job is
sometimes not visible because it is still physically within the
printer. By selecting Use Form Feed the printer advances the
paper to the top of the next page.
1 REAL TIME LOG
2 USE FORM FEED
!
!
Printing the real time log via the Serial Port ceased from version 3.2.0 onwards.
Or: 953 REMOTE USER PHONES from version 3.2.0 onwards.
85