User manual C4 – C6
22
Take extra caution and safety measures in situations
where the ground, the surroundings or the load strongly
influences or restricts the use of the machine. When in
doubt about the safe use of the machine, get advice
from a specialist or contact your dealer or the
manufacturer.
Maintain a close watch on the active outrigger leg
during extension to prevent foot entrapment.
The compact crane may only be moved by means of
hold-to-run control. Always maintain a good view of the
surrounding area, to avoid hitting people or objects.
Use communication equipment if the operator does not
have a complete overview of the working area of the
compact crane.
Never leave a machine unattended with the keys and
remote control.
Keep the compact crane clean and prevent
accumulation of contamination.
Follow national regulations concerning working
conditions and work safety when using the compact
crane.
It is recommended that the outriggers be positioned 10
cm above the ground and alongside the machine when
driving on a soft or inclined surface to prevent tipping
over.
It is not possible to fold in the jib when the boom is
raised above 45 degrees.
To Next Page
Loading...