Honeywell Accenta Series - Zones; Fire Zone

Accenta/Optima Engineer’s Manual
7
Fire Zone
Zones 7 and 8 may be programmed as fire zones. This will automatically exclude the availability of the zone
from programs and normal security applications.
Fire detector
Note: Fire detector with
relay base for output
to intruder system.
J2
PA
+
-
TAMP
+13V
0V
Board
1
2
3
4 5
6
7
8
Panel
Figure 8. Fire Zones
The fire zone detects fires all the time and will operate whether the system is Set or Unset. A fire will cause a
distinctive internal sounder tone. The external sounders will pulse on and off at 2 second intervals and all RKP
indicators will flash the affected zone.
Zones