Accenta/Optima Engineer’s Manual
1
Introduction
This manual provides information on Installation design, panel fixing, wiring, power up and programming of the
intruder panels.
Features
8 zones programmable for Security, 2 zones for Fire.
PA input.
Tamper input.
Outputs for External Siren (Bell) and Strobe.
4 Access level Codes, User 1, User 2, Engineer and Duress, all programmable.
3 fully selectable part set programs.
Chime on any security zone.
250 event memory (LCD Keypad), 8 event memory (LED keypad).
Programmable timers including bell cut off.
Walk Test facilities.
Quick set feature.
Supports up to four remote keypads with on board PA and illuminated keys positioned up to
100 meters from the panel.
Keypads can be wired in a star or daisy chain configuration from the panel.
Optima is supplied with a built in keypad.
Support of Prox set and unset with Simple Set keypad.
NVM for protection of engineer program and event log.
5 digital outputs for a wire-in digital communicator or dialler
(Not applicable for Optima compact panel).
Battery capacity of up to : 2.1Ah in Accenta/Optima mini enclosure,
7Ah in Accenta/Optima metal enclosure.
Features
4
2
To Next Page
Loading...
Need help?
General
