Accenta/Optima Engineer’s Manual
46
Specifications
Table 3. Specifications
Specs
8 zones +ve loop, programmable function in each program
Tamper -ve loop, internal sounders in Day - Full alarm in Set
PA +ve loop, always active
External siren (Bell Box) output 12V, adjustable timer (1 - 99 mins) or continuous
Strobe output 12V latching
External speaker 16 ohm (2 maximum) 260mA each
Exit /Entry Timers seconds Programmable (05 - 990 seconds)
Set output 0V in Day (sinking 400mA)
12V in Set (sourcing 10mA)
Current consumption control panel Standby 80mA
Alarm 250mA
Current consumption (LED keypad) Standby 40mA
Alarm 70mA
Current Consumption (LCD keypad) Standby 40 mA
Alarm 70 mA
Low voltage output 13.8V dc stabilised (+/-5%) up to 350mA
Rechargeable battery Accenta mini/Optima - 12V, up to 2.1Ah.
Accenta metal encl. - 12V, up to 7Ah
Charge Voltage 13.8V dc
Board fuses 1.6A & 1A 20mm quick blow
Mains input fuse 125mA, 250V type T (anti-surge) type approved to IEC
127, part 2 sheet 111
Total Current Output 1A when supported by a fully charged battery
Mains supply voltage 230V (+/-10%) 50Hz max load 0.2A
Ambient operating temperature 0
o
C to 40
o
C
Dimensions - Accenta mini/Optima H: 200mm
W: 253mm
D: 55mm
Dimensions - Accenta Metal encl. H: 255mm
W: 300mm
D: 85mm
Dimensions - LED keypad H: 84.5mm
W: 122mm
D: 27.5mm
Dimensions - LCD keypad H: 105mm
W: 135mm
D: 25.5mm
To Next Page
Loading...
Need help?
General
