Accenta/Optima Engineer’s Manual
30
C = View Event Log
1 = LCD Keypad:
The event log gives a display of all the events that have taken place. The events are arranged by date and time.
Up to 250 events can be stored in the memory. When the log reaches 250 events and another event takes
place, the first event drops out. The system is known as FILO (First In Last Out).
To view the event log:
• Press the [up arrow] until you come to the first screen.
• Press [CHIME] or [SET] .
• Choose [1] for Event Log in LCD screen.
• The last event (250) appears on LCD screen.
To go forward through the event log in sequence, press [OMIT].
To go back through the event log in sequence, press the [up arrow].
• Press [RESET] twice to leave the menu
To go to a specific event:
• Press the [PROG] button.
• Key in Event Number you want to see (eg 150).
• Press the [SET] button. The event appears on the LCD screen.
• Press [SET] again to see further details of the event.
• Press [RESET] twice to leave the menu option.
Event Log
250>ENG ACCESS250>ENG ACCESS
250>ENG ACCESS250>ENG ACCESS
250>ENG ACCESS
08:44:03 17-May08:44:03 17-May
08:44:03 17-May08:44:03 17-May
08:44:03 17-May
C>ViewC>View
C>ViewC>View
C>View
Event Log Event Log
Event Log Event Log
Event Log
[CHIME] or [SET]
Event LogEvent Log
Event LogEvent Log
Event Log
1 LCD, 2 LED?1 LCD, 2 LED?
1 LCD, 2 LED?1 LCD, 2 LED?
1 LCD, 2 LED?
[1]
Event Number?Event Number?
Event Number?Event Number?
Event Number?
######
######
###
[PROG]
[150]
150>Code entry150>Code entry
150>Code entry150>Code entry
150>Code entry
09:23:12 04-Jan09:23:12 04-Jan
09:23:12 04-Jan09:23:12 04-Jan
09:23:12 04-Jan
[SET]
[SET]
[RESET]
Event Number?Event Number?
Event Number?Event Number?
Event Number?
150150
150150
150
User 4User 4
User 4User 4
User 4
C>ViewC>View
C>ViewC>View
C>View
Event LogEvent Log
Event LogEvent Log
Event Log
To Next Page
Loading...
Need help?
General
