perating and Installation
Alkaline cells are also available in a completely disposable package option. After the service life
of the battery pack has expired, the user simply disposes of the entire assembly, including the
specifications section of this manual, or the control drawing for a compiled listing of
Disposable Alkaline Battery Pack
To avoid loss of system power to the CNI2 board during battery changes, it is recommended
batteries be connected to the available J1 or J2 connector before removal of the
old battery pack. This is a hot swap method that is permitted for the brief period during which
batteries are to be replaced.
Physical space is not availabl
e within the enclosure to permit two battery packs to be
permanently installed simultaneously. In addition, parallel battery packs would violate
hazardous area safety approvals for this product.
To Next Page
Loading...
