Honeywell CNI2 - Connector J7

CNI2
O
perating and Installation
Guide
42
This line can also be configured as
an
additional
alarm
-
sensing
input
, a pulse
-
counting
input or
as an output
.
Connector
J7
There is no d
efault function
for
J7
. It can be configured as
an
additional
alarm
-
sensing
input
, a
pulse
-
counting input or as an output
. Circuit connection is intended for a “dry” contact switch,
meaning that it is a
simple switch (or transistor) with no drive voltage.
It can also be defined as a “Special Purpose Output” which allows the CNI2 to use this line to
control some internal function. This is described in more detail later in this document under the
heading
“
Special Purpose Output
”.