Xenon/Granit User Guide 221
Data Matrix
< Default All Data Matrix Settings >
Data Matrix On/Off
Data Matrix Message Length
Scan the bar codes below to change the message length. Refer to Message Length
Description (page 178) for additional information. Minimum and Maximum
lengths = 1-3116. Minimum Default = 1, Maximum Default = 3116.
Data Matrix Append
This function allows the scanner to append the data from several Data Matrix bar
codes together before transmitting them to the host computer. When the scanner
encounters an Data Matrix bar code with the append trigger character(s), it buffers
the number of Data Matrix bar codes determined by information encoded in those
bar codes. Once the proper number of codes is reached, the data is output in the
order specified in the bar codes. Default = On.
To Next Page
Loading...
