Honeywell Granit 1981i - Page 311

Xenon/Granit User Guide 291
Planet, Postal-4i, Intelligent Mail
Bar Code, and Postnet On
POSTAL28 228
Planet, Postal-4i, Intelligent Mail
Bar Code, and Postnet with B and
B’ Fields On
POSTAL29 228
Planet Code Check Digit Transmit PLNCKX1 229
*Don’t Transmit PLNCKX0 229
Postnet Check Digit Transmit NETCKX1 229
*Don’t Transmit NETCKX0 229
Australian Post Interpretation Bar Output AUSINT0 229
Numeric N Table AUSINT1 230
Alphanumeric C Table AUSINT2 230
Combination N and C Tables AUSINT3 230
Postal Codes - Linear
China Post (Hong Kong 2 of 5) Default All China Post (Hong Kong
2 of 5) Settings
CPCDFT 230
*Off CPCENA0 230
On CPCENA1 230
China Post (Hong Kong 2 of 5)
Msg. Length
Minimum (2 - 80) *4 CPCMIN## 230
Maximum (2 - 80) *80 CPCMAX## 230
Korea Post Default All Korea Post Settings KPCDFT 231
*Off KPCENA0 231
On KPCENA1 231
Korea Post Msg. Length Minimum (2 - 80) *4 KPCMIN## 231
Maximum (2 - 80) *48 KPCMAX## 231
Korea Post Check Digit Transmit Check Digit KPCCHK1 231
*Don’t Transmit Check Digit KPCCHK0 231
Imaging Default Commands
Image Snap Default all Imaging Commands IMGDFT 233
Imaging Style - Decoding SNPSTY0 234
*Imaging Style - Photo SNPSTY1 234
Imaging Style - Manual SNPSTY2 234
Beeper On SNPBEP1 234
*Beeper Off SNPBEP0 234
*Wait for Trigger Off SNPTRG0 235
Wait for Trigger On SNPTRG1 235
*LED State - Off SNPLED0 235
LED State - On SNPLED1 235
Exposure (1-7874 microseconds) SNPEXP 235
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page