www.honeywell.com/security
26 |
MPA1 User Guide
Figure 2-7 Selecting WEB on the Host/Loop Communications Tab
3. Configure the host settings.
4. Click Save.
Configuring for MAXPRO Cloud
1. Navigate to Host/Loop Communications:
• Dashboard > Panels > Host/Loop Communications, or
• Menu > Panel Configuration > Host/Loop Communications.
2. Click to select MAXPRO Cloud.
Table 2-3 Web Host Communication Mode Settings
Host Setting Description
Mode EVL - If Primary provides access to Ethernet Virtual Loop.
Time Sync Synchronizes the primary’s time with the secondary
panels.
Enabled – Time-synchronizes the loop by automatically
broadcasting the primary's time to secondary panels.
Select from 60-32767 minutes.
To Next Page
Loading...
