www.honeywell.com/security
92 |
MPA1 User Guide
Taking System-wide Backup for panel(s) is only allowed from Primary (gateway) panel's file
management page.
• Upon selecting system wide backup, UI will show a field to enter password
• Password Must follow rules for valid password checks - need not be same as
current user/admin password:
• Click save button the spinner will show while Primary panel is getting configuration
data from the Secondary panels.
Note The Backup file saves as a .bkp file.
Download (To Panel)
Following types of downloads are allowed from File Management sections
• Firmware (.bin file)
• Card Report (.CSV file)
• Backup file (.bkp file)
Firmware Download (Also see: Firmware Upgrades)
To restore (or download) firmware to a panel:
1. Select a Panel first, on which you want to download firmware from Panel
Configuration menu.
2. Click Browse to locate the firmware file.
3. Click Download.
When the download is completed, the panel is immediately rebooted. A status bar indicates
the progress of the reboot.
To Next Page
Loading...
