www.honeywell.com/security
94 |
MPA1 User Guide
Note Restoring any panel whose back-up info is not available in the .bkp file will
not be restored.
Note During the restore process, the system will prompt for a password that must
match the password that was used when the backup file was created.
Panel only restore will restore Panel Configuration data for the specific panel
and the Restore Entire Loop option will restore Card, Common and Panel
Configuration data to each panel in the loop.
Off-line panels while taking back-ups or restores will not be serviced.
Restoring any panel whose back-up info is not available in the .bkp file will
not be restored.
Restoring (Downloading) Entire Loop
1. Click Browse to locate the firmware file.
2. Click Immediate.
3. Click Download.
When the download is completed, the panel is immediately rebooted. A status bar
indicates the progress of the reboot.
To Next Page
Loading...
Need help?
General
