FireWarden 100-2/E — P/N 52778:A 11/04/2005 153
Transmittal Priorities Central Station Communications
The table below shows UL listed receivers which are compatible with the NFW2-100.
1. With 685-8 Line Card with Rev. 4.4d software
2. With 9002 Line Card Rev. 9035 software or 9032 Line Card with 9326A software
3. Rev. 4.0 software
4. FBI CP220FB Rec-11 Line Card with Rev. 2.6 software and a memory card with Rev. 3.8
software
5. Model 6500 with Rev. 600 software
6. Mode 6000 with Rev. 204 software
7. With Rev. B control card at Rev. 1.4 software and Rev. C line card at Rev. 1.5 software
8. Model 2 only
9. Version 1.62 software
IMPORTANT! It is the installer’s responsibility to ensure that the Digital Alarm
Communicator/Transmitter is compatible with the Central Station Receiver, utilized by the
monitoring service, prior to installation. The Compatibility Table provides a list of compatible
receivers and associated software versions for the receivers. Changes in the hardware and/or
software by the receiver manufacturers may affect the receiver compatibility with the FACP DACT.
After completing the installation, communication between the DACT and Central Station Receiver
must be tested and verified.
Table 5.3 Compatible UL Listed Receivers
Format #
(Addresses 16 & 42)
Ademco
685 (1)
Silent Knight
9000 (2)
ITI
CS-4000 (3)
FBI
CP220FB
Osborne Hoffman
Models 1 & 2
Radionics
6000 (6)
Radionics
6500 (5)
Sescoa
3000R (7)
Surguard
MLR-2 (9)
0 4+1 Ademco Express
1 4+2 Ademco Express
(8)
2 3+1/Standard/1800/2300
(4)
3 3+1/Expanded/1800/2300
(4)
4 3+1/Standard/1900/1400
(4)
5 3+1/Expanded/1900/1400
(4)
6 4+1/Standard/1800/2300
(4)
7 4+1/Expanded/1800/2300
(4)
8 4+1/Standard/1900/1400
(4)
9 4+1/Expanded/1900/1400
(4)
A 4+2/Standard/1800/2300
(4)
B 4+2/Expanded/1800/2300
(4)
C 4+2/Standard/1900/1400
(4)
D 4+2/Expanded/1900/1400
(4)
E Ademco Contact ID
FNot Used
To Next Page
Loading...
Need help?
General
