Honeywell NOTIFIER FireWarden-100-2 - NAC Configuration Options; NAC Enable;Disable Status

84 FireWarden 100-2/E — P/N 52778:A 11/04/2005
Programming Master Programming Level
The following screens will be displayed for each selection:
 Enabled
Pressing 1 while viewing NAC Screen #1 will cause the display to change to Enabled No. This will
prevent the selected main circuit board NAC from activating its devices. Each press of the 1 key
will cause the display to toggle between Enabled Yes and Enabled No.
NAC #
1=ENABLED YES
2=TYPE BELL
3=SILENCEABLE YES
NAC Screen #1
NAC #
1=ZONE
00 00 00 00 00
2=SIL INHIBITED NO
NAC Screen #2
NAC #
1=AUTO SILENCE 00
2=CODING
TEMPORAL
NAC Screen #3
NAC #
1=SYNC TYPE S
NAC Screen #4
NOTE: The programming for NAC 1 will determine the operation of the remote power supply
sync.