Honeywell PC42d User Manual

Chapter 3: Printer Troubleshooting and Maintenance
User Instructions for PC42d Desktop Printer 29
Using printer web page to restore default setting
If your printer is connected to the Ethernet you can restore default setting using the
printer's web page.
1. Launch a web browser on your desktop PC;
2. Key in the printer’s IP address on the address toolbar, then press ‘Enter’; the
printer web page will be displayed.
3. Click on 'Login’ on the top right-hand corner to show the Login page;
4. Enter your 'Username’ and ‘Password’, then click ‘Login’. The default username
is ‘itadmin’ and the default password is ‘pass’;
5. Click 'Services’ options > ‘Restore Defaults’.
6. Select the setting that you wish to be restored:
 Select ‘Network settings’ for default setting of all network connections, e.g. IP
address, network name;
 Select ‘User-Installed Files’ check box to delete all documents that are
uploaded to and stored in the printer;
 Select 'System Settings’ check box to restore the system settings' default value,
e.g. medium width.

Honeywell PC42d Specifications

General

Color	No
Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Maximum print height	- mm
Maximum printing width	104 mm
Display	-
Product color	Black
Ethernet LAN	Yes
USB 2.0 ports quantity	1
Flash memory	128 MB
Internal memory	64 MB
Built-in barcodes	1D, 2D, Code 49, Data Matrix, MaxiCode, MicroPDF417, PDF417, QR Code
Core diameter	38.1 mm
Maximum label width	110 mm
Maximum label length	0.99 m
Maximum roll diameter	128 mm
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	5 - 40 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	15 - 80 %

Weight and Dimensions

Depth	174 mm
Width	184 mm
Height	222.5 mm
Weight	1500 g