Honeywell PC42d User Manual

Chapter 3: Printer Troubleshooting and Maintenance
User Instructions for PC42d Desktop Printer 31
Changing printer head
As the printer head undergoes wear and tear as a result of rapid heating and cooling
during the printing process, you would be required to regularly replace it. The duration
between each replacement of the printer head is dependent on many factors, including
the type of images printed, the medium use, the energy volume of the printer head,
printing speed and the room temperature of the room in which the printer is situated.
When the printer is being re-activated, its firmware will check the printer head.
1. Switch off the printer and remove its power supply;
2. Open the printer’s cover by turning the handles on both sides of the printer;
3. Simultaneously turn the flexible locking mechanism on both sides of the printer
head such as to enable the printer head to move forward away from the printing
mechanism.
4. Carefully remove the printer head from the printing mechanism using a cross
screwdriver in such a way that the printer head is still be connected to it but only by
way of electric cable and ground screw;
5. Use #2 cross screwdriver to remove the ground screw.

Honeywell PC42d Specifications

General

Color	No
Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Maximum print height	- mm
Maximum printing width	104 mm
Display	-
Product color	Black
Ethernet LAN	Yes
USB 2.0 ports quantity	1
Flash memory	128 MB
Internal memory	64 MB
Built-in barcodes	1D, 2D, Code 49, Data Matrix, MaxiCode, MicroPDF417, PDF417, QR Code
Core diameter	38.1 mm
Maximum label width	110 mm
Maximum label length	0.99 m
Maximum roll diameter	128 mm
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	5 - 40 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	15 - 80 %

Weight and Dimensions

Depth	174 mm
Width	184 mm
Height	222.5 mm
Weight	1500 g