Honeywell PC42d User Manual

Chapter 2: Connecting the Printer
20 User Instructions for PC42d Desktop Printer
Configuring the printer
You can configure your printer in the following manners:
 Using printer portal;
 Using simple diagnostic tools (SDT). SDTs are included in the Printer Companion
CD.
Configuring the printer using printer portal
You can configure the majority of network settings using the printer portal.
1. Launch a web browser on your PC;
2. Key in the printer’s IP address on the address toolbar, then press ‘Enter’. The
printer portal will be displayed.
Note: If you do not know the printer's IP address, print a configuration label to find it.
Please refer to Page 14 “Testing Labels”
3. Click ‘Login ;’.
4. Enter ‘Username’ and ‘Password’, then click 'Login’ again. The default user
name is ‘itadmin’ and default password is 'pass’;

Honeywell PC42d Specifications

General

Color	No
Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Maximum print height	- mm
Maximum printing width	104 mm
Display	-
Product color	Black
Ethernet LAN	Yes
USB 2.0 ports quantity	1
Flash memory	128 MB
Internal memory	64 MB
Built-in barcodes	1D, 2D, Code 49, Data Matrix, MaxiCode, MicroPDF417, PDF417, QR Code
Core diameter	38.1 mm
Maximum label width	110 mm
Maximum label length	0.99 m
Maximum roll diameter	128 mm
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	5 - 40 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	15 - 80 %

Weight and Dimensions

Depth	174 mm
Width	184 mm
Height	222.5 mm
Weight	1500 g