Honeywell PC42d User Manual

Appendix B - Default Settings
44 User Instructions for PC42d Desktop Printer
Ethernet settings
This section explains the Ethernet IPv4 settings. To view such settings:
 On the printer web page click ‘Configure’ options > ‘Communications’ >
‘Ethernet’.
Ethernet settings
Setting
Description
Default Value
IP distribution
method
Designates the method with which the printer obtains its IP address.
DHCP
IP address
Designates the sole layer network address assigned to each device in
the TCP/IP network (IPv4).
0.0.0.0
Subnet mask
Designates the numerals used to define the IP address in a TCP/IP
network.
0.0.0.0
Default router
Designates the router’s IP address. The device will send data packet
to another subnet or unknown destination through this router.
0.0.0.0
DHCP response
Designates whether the printer receives DHCP response through
broadcast or unicast.
Broadcast
Medium settings
This section explains the medium settings of the printer. To view such settings:
 On the printer web page click ‘Configure’ options > ‘Printing’ > ‘Media’.
Note: If the printer is not connected to a network, you would be required to use SDTs
and configure the medium settings via USB connection.

Honeywell PC42d Specifications

General

Color	No
Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Maximum print height	- mm
Maximum printing width	104 mm
Display	-
Product color	Black
Ethernet LAN	Yes
USB 2.0 ports quantity	1
Flash memory	128 MB
Internal memory	64 MB
Built-in barcodes	1D, 2D, Code 49, Data Matrix, MaxiCode, MicroPDF417, PDF417, QR Code
Core diameter	38.1 mm
Maximum label width	110 mm
Maximum label length	0.99 m
Maximum roll diameter	128 mm
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	5 - 40 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	15 - 80 %

Weight and Dimensions

Depth	174 mm
Width	184 mm
Height	222.5 mm
Weight	1500 g