SF61 Cordless Scanner User’s Guide 9
To Turn On Vibrate Alert for a Good Read
• Scan this barcode:
Vibrate alert - On good read - Enable (*)
To Turn Off Vibrate Alert for a Good Read
• Scan this barcode:
Vibrate alert - On good read - Disable
Scan Barcodes
The SF61BHP contains a 2D area imager to scan barcode data. When you unpack
the SF61BHP, the following barcode symbologies are enabled by default:
• Code 39 (*)
• Code 128 / GS1-128 (*)
• EAN/UPC (*)
• Data Matrix (*)
• PDF417 (*)
• QR Code (*)
Note: Use EasySet to enable and configure other symbologies (you will find them in the
Symbologies section of the EasySet commands window).
see Configure Your Scanner with EasySet on page 33 for details on how to use
EasySet.
Before you can scan barcodes and send data to your data collection application,
you need to establish a Bluetooth connection between your SF61B and your
Bluetooth host device. If your scanner is not connected it will emit an error beep
when scanning barcodes. For more information about establishing a Bluetooth
connection, see Connect the SF61B, beginning on page 15.
To Next Page
Loading...
Need help?
General
