SF61 Cordless Scanner User’s Guide 35
To Disconnect Your Scanner from EasySet
1. Select Disconnect from the Communication menu in EasySet.
HID connection: the scanner disconnects from EasySet and restarts, and then
goes into “ready to work” mode (the blue Honeywell Ready-to-Work indicator
comes on) as it is still connected to the host PC.
Host-initiated Outgoing SPP connection: the scanner disconnects from
EasySet and restarts but it is no longer connected to the host PC.
Offline Setup with EasySet
To configure your scanner offline by scanning barcodes
1. Start EasySet. The first time you start EasySet, the Select product dialog box
appears.
If the Select product dialog box does not appear, choose Product > Select or
click on the product icon in the upper left corner of the EasySet window.
2. Select your product.
3. Open the folders in the EasySet commands window to find the configuration
commands you need and double-click each command to send it to the setup
sheet.
4. Click on the Print icon to print out the setup sheet and then scan the
commands with your SF61B cordless scanner.
Configure Your Scanner from Your Honeywell Computer
You can configure many settings for the SF61B from your Honeywell computer
using Honeywell Settings.
To Configure the SF61B from Your Honeywell Computer
Note: The description in this section is provided as a general guideline. Consult your
Honeywell computer documentation for full details on how to set up your Bluetooth
scanner from your Honeywell computer.
Note: When you first connect to Honeywell computer, only SF61B settings common to the
Honeywell computer internal scanner settings are changed to the internal scanner
default settings.
To Next Page
Loading...
Need help?
General
