Honeywell SF61 Series User Manual

36 SF61 Cordless Scanner User’s Guide
1. Establish a Bluetooth connection with your Honeywell computer (see Connect
the SF61B to Honeywell Computer on page 16).
2. On your Honeywell computer, start the Honeywell Settings application which
may be located in Settings > System folder depending on your Honeywell
computer.
3. Select Data Collection > SF61 Scanner BDA, where BDA is the Bluetooth
Device Address (BDA) of your SF61B. The SF61B Bluetooth address is located
on the label of your SF61B, see SF61B Bluetooth Device Address Location on
page 16.
4. Configure commands from the SF61 Scanner menu for your SF61B.
5. Select File > Save Settings. The SF61B is updated with the new configuration
command settings.
6. Close Honeywell Settings.

Honeywell SF61 Series Specifications

General

Brand	Honeywell
Model	SF61 Series
Category	Barcode Reader
Language	English