Honeywell SF61 Series User Manual

SF61 Cordless Scanner User’s Guide 33
Slovakian Windows
Hungarian 101-key
Configure the Postamble
The default postamble is <CR> <LF>. For certain applications or when using your
scanner as an HID Bluetooth device you may need to change this setting. Use the
following configuration barcodes to change the default postamble in your scanner.
More postamble options are available with EasySet or with your Honeywell
computer (see Configure Your Scanner with EasySet and Configure Your Scanner
from Your Honeywell Computer in the present chapter).
Carriage Return + Line Feed (*)
None
Carriage Return
Enter
Configure Your Scanner with EasySet
EasySet is Honeywell Windows-based scanner setup software application.
You can use EasySet to set up your scanner product in two ways:
• Online setup—send configuration commands from EasySet directly to your
scanner.
• Online setup via the SD62 base station—send configuration commands from
EasySet to the scanner via the SD62 base station
• Offline setup-send configuration commands to a barcode setup sheet, print out
the setup sheet and scan the barcodes with your scanner.
If it is not already installed on your host PC, download and install the latest version
of EasySet at this link on the Honeywell website: https://hsmftp.honeywell.com/.

Honeywell SF61 Series Specifications

General

Brand	Honeywell
Model	SF61 Series
Category	Barcode Reader
Language	English