16 SF61 Cordless Scanner User’s Guide
SF61B Bluetooth Device Address Location
When connecting your SF61B to a host device you may need to note its Bluetooth
Device Address (BDA) which you will find on the product label:
SF61B Bluetooth Device Address: The SF61B Bluetooth Device Address (BDA) is
located on the scanner label.
You may also need the BDA of the Bluetooth host device you want to connect to.
Connection Lost Behavior
If the Bluetooth connection is lost (out of range, scanner battery too low, host
reboot, etc.) the scanner will automatically try to reconnect once the problem is
resolved (back into range, recharge scanner battery, etc.). If you try to read a
barcode while the scanner is disconnected from the host, the scanner will emit an
error beep.
Note: This automatic reconnection will not occur if the SPP Outgoing (host-initiated)
profile is used to pair with the host.
Connect the SF61B to Honeywell Computer
Note: The following procedure is valid for recent Honeywell computers. If your Honeywell
computer has a different interface to the one described here, the general principle
will be the same.
Refer to the product-specific documentation for your Honeywell computer for full
details on how to connect Bluetooth devices to your product.
This procedure tells you how to connect your SF61B Cordless Scanner to a recent
Honeywell computer running Windows®.
To Next Page
Loading...
Need help?
General
