Honeywell Voyager 1202G User Manual

iii
Scanner-Bioptic Packet Mode............................. 2-28
ACK/NAK............................................................. 2-28
Communication Timeout ..................................... 2-28
Chapter 3 - Cordless System Operation
How the Charge and Communications Base Works ... 3-1
Linking the Scanner to a Base .................................... 3-1
Communication Between the Cordless System
and the Host.............................................................. 3-2
RF (Radio Frequency) Module Operation ................... 3-2
System Conditions ...................................................... 3-3
Linking Process..................................................... 3-3
Scanner Is Out of Range....................................... 3-3
Scanner Is Moved Back Into Range...................... 3-3
Out of Range and Back into Range
with Batch Mode On......................................... 3-3
Page Button ................................................................ 3-3
About the Battery ........................................................ 3-4
Voyager 1202g Battery Removal ................................ 3-4
Charging Information............................................. 3-4
Battery Recommendations.................................... 3-5
Proper Disposal of the Battery .............................. 3-6
Flash Updates ............................................................. 3-6
Beeper and LED Sequences and Meaning................. 3-6
Scanner LED Sequences and Meaning ................ 3-6
Base LED Sequences and Meaning ..................... 3-7
Base Power Communication Indicator .................. 3-7
Reset Scanner ............................................................ 3-8
Scanning While in Base Cradle................................... 3-8
Paging ......................................................................... 3-8
Paging Mode ......................................................... 3-8
Paging Pitch ......................................................... 3-9
Error Indicators............................................................ 3-9
Scanner Address......................................................... 3-9
Base Address............................................................ 3-10
Scanner Modes ......................................................... 3-10

Honeywell Voyager 1202G Specifications

General

Type	Handheld bar code reader
Sensor type	Laser
Scanner type	1D
Pitch reading angle	60 - 60 °
Linear (1D) barcodes supported	-
Wireless range	10 m
Bluetooth version	2.1+EDR
Operating frequency	2.4 - 2.5 MHz
Standard interfaces	Bluetooth
Connectivity technology	Wireless
Battery life	12 h
Charging time	4 h
Input voltage	5 V
Battery capacity	1800 mAh
Power source type	Battery
Number of reads per charge	45000
Product color	Black
International Protection (IP) code	IP42
Storage temperature (T-T)	-5 - 35 °C
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	0 - 95 %
Sustainability certificates	RoHS
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	180 mm
Width	66 mm
Height	92 mm
Weight	180 g
Base weight	185 g
Base dimensions	200 x 67 x 97 mm