Honeywell Voyager 1202G User Manual

10 - 6
Menu Commands
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page
Product Default Settings
Setting Custom
Defaults
Set Custom Defaults MNUCDF 1-8
Save Custom
Defaults
DEFALT 1-8
Resetting the
Custom Defaults
Activate Custom
Defaults
DEFALT 1-9
Resetting the Factory
Defaults
Remove Custom
Defaults
DEFOVR 1-9
Activate Defaults DEFALT 1-9
Programming the Interface
Plug and Play Codes Keyboard Wedge:
IBM PC AT and
Compatibles with
CR suffix
PAP_ AT 2-1
IBM PS2 Keyboard PAPPS2 2-1
RS232 Serial Port PAP232 2-2
Plug and Play Codes:
RS485
IBM Port 5B
Interface
PAPP 5B 2-2
IBM Port 9B
HHBCR-1 Interface
PAP9B1 2-2
IBM Port 17
Interface
PAPP 17 2-2
IBM Port 9B
HHBCR-2 Interface
PAP9B2 2-2
OPOS Mode OPOS Mode PAPOPS 2-3
Plug and Play Codes:
IBM SurePos
USB IBM SurePos
Handheld
PAPSPH 2-4
USB IBM SurePos
Tabletop
PAPSPT 2-4
IBM Secondary
Interface
* Enable Secondary
Interface
REMIFC1 2-4
Disable Secondary
Interface
REMIFC0 2-4

Honeywell Voyager 1202G Specifications

General

Type	Handheld bar code reader
Sensor type	Laser
Scanner type	1D
Pitch reading angle	60 - 60 °
Linear (1D) barcodes supported	-
Wireless range	10 m
Bluetooth version	2.1+EDR
Operating frequency	2.4 - 2.5 MHz
Standard interfaces	Bluetooth
Connectivity technology	Wireless
Battery life	12 h
Charging time	4 h
Input voltage	5 V
Battery capacity	1800 mAh
Power source type	Battery
Number of reads per charge	45000
Product color	Black
International Protection (IP) code	IP42
Storage temperature (T-T)	-5 - 35 °C
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	0 - 95 %
Sustainability certificates	RoHS
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	180 mm
Width	66 mm
Height	92 mm
Weight	180 g
Base weight	185 g
Base dimensions	200 x 67 x 97 mm