1 - 4
2. Make sure the cables are secured in the wireways in the bottom of the
base and that the base sits flat on a horizontal surface.
3. Turn the terminal/computer power back on. The scanner beeps.
4. Verify the scanner or base operation by scanning a bar code from the
Sample Symbols in the back of this manual. The scanner beeps once.
The unit defaults to an IBM PC AT and compatibles keyboard wedge inter-
face with a USA keyboard. A carriage return (CR) suffix is added to bar
code data.
Charge and
Communications Base
Keyboard Wedge
Connection:
To Next Page
Loading...
