138 Vuquest 3320g User Guide
Aztec Code Page
Aztec Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the bar
code being scanned was created using a code page that is different from the one
the host program is expecting. If this is the case, scan the bar code below, select
the code page with which the bar codes were created (see Symbology Charts on
page 209), and scan the value and the Save bar code from the on the inside the
back cover of this manual. The data characters should then appear properly.
Chinese Sensible (Han Xin) Code
< Default All Han Xin Settings >
Han Xin Code On/Off
Han Xin Code Message Length
Scan the bar codes below to change the message length. Refer to Message Length
Description (page 92) for additional information. Minimum and Maximum lengths
= 1-7833. Minimum Default = 1, Maximum Default = 7833.
To Next Page
Loading...
Need help?
General