Honeywell Vuquest 3330 - Input;Output Selections

180 Vuquest 3320g User Guide
Word Length: Data Bits, Stop Bits,
and Parity
7 Data, 1 Stop, Parity Even
232WRD3
27
7 Data, 1 Stop, Parity None 232WRD0 27
7 Data, 1 Stop, Parity Odd 232WRD6 27
7 Data, 2 Stop, Parity Even 232WRD4 27
7 Data, 2 Stop, Parity None 232WRD1 27
7 Data, 2 Stop, Parity Odd 232WRD7 27
8 Data, 1 Stop, Parity Even 232WRD5 27
*8 Data, 1 Stop, Parity None 232WRD2 27
8 Data, 1 Stop, Parity Odd 232WRD8 27
8 Data, 1 Stop, Parity Mark 232WRD14 27
RS232 Receiver Time-out Range 0 - 300 seconds 232LPT### 28
RS232 Handshaking *RTS/CTS Off 232CTS0 28
Flow Control, No Timeout 232CTS1 28
Two-Direction Flow Control 232CTS2 28
Flow Control with Timeout 232CTS3 28
RS232 Timeout 232DEL#### 29
*XON/XOFF Off 232XON0 29
XON/XOFF On 232XON1 29
*ACK/NAK Off 232ACK0 29
ACK/NAK On 232ACK1 29
Scanner-Bioptic Packet Mode *Packet Mode Off 232PKT0 30
Packet Mode On 232PKT2 30
Scanner-Bioptic ACK/NAK Mode *Bioptic ACK/NAK Off 232NAK0 30
Bioptic ACK/NAK On 232NAK1 30
Scanner-Bioptic ACK/NAK
Timeout
ACK/NAK Timeout
*5100
232DLK##### 31
Input/Output Selections
Power Up Beeper Power Up Beeper Off - Scanner BEPPWR0 33
*Power Up Beeper On - Scanner BEPPWR1 33
Beep on BEL Character Beep on BEL On BELBEP1 33
*Beep on BEL Off BELBEP0 33
Trigger Click On BEPTRG1 34
*Off BEPTRG0 34
Beeper - Good Read Off BEPBEP0 34
*On BEPBEP1 34
Selection
Setting
* Indicates default
Serial Command
# Indicates a
numeric entry
Pag
e