Honeywell Vuquest 3330 - Postal Codes - Linear; Imaging Default Commands

194 Vuquest 3320g User Guide
Australian Post Interpretation Bar Output AUSINT0 144
Numeric N Table AUSINT1 145
Alphanumeric C Table AUSINT2 145
Combination N and C Tables AUSINT3 145
Postal Codes - Linear
China Post (Hong Kong 2 of 5) Default All China Post (Hong Kong 2 of 5)
Settings
CPCDFT 145
*Off CPCENA0 145
On CPCENA1 145
China Post (Hong Kong 2 of 5)
Msg. Length
Minimum (2 - 80) *4 CPCMIN## 145
Maximum (2 - 80) *80 CPCMAX## 146
Korea Post Default All Korea Post Settings KPCDFT 146
*Off KPCENA0 146
On KPCENA1 146
Korea Post Msg. Length Minimum (2 - 80) *4 KPCMIN## 146
Maximum (2 - 80) *48 KPCMAX## 146
Korea Post Check Digit Transmit Check Digit KPCCHK1 146
*Don’t Transmit Check Digit KPCCHK0 146
Imaging Default Commands
Image Snap Default all Imaging Commands IMGDFT 147
Imaging Style - Decoding SNPSTY0 148
*Imaging Style - Photo SNPSTY1 148
Imaging Style - Manual SNPSTY2 148
Beeper On SNPBEP1 148
*Beeper Off SNPBEP0 148
*Wait for Trigger Off SNPTRG0 148
Wait for Trigger On SNPTRG1 148
*LED State - Off SNPLED0 149
LED State - On SNPLED1 149
Exposure (1-7874 microseconds) SNPEXP 149
*Gain - None SNPGAN1 149
Gain - Medium SNPGAN2 149
Gain - Heavy SNPGAN4 149
Gain - Maximum SNPGAN8 149
Target White Value (0-255) *125 SNPWHT### 150
Delta for Acceptance (0-255) *25 SNPDEL### 150
Update Tries (0-10) *6 SNPTRY## 150
Selection
Setting
* Indicates default
Serial Command
# Indicates a
numeric entry
Pag
e