Honeywell Vuquest 3330 - Page 211

Vuquest 3320g User Guide 195
Target Set Point Percentage (1-99) *50 SNPPCT## 150
Image Ship *Infinity Filter - Off IMGINF0 151
Infinity Filter - On IMGINF1 151
*Compensation Off IMGCOR0 151
Compensation On IMGCOR1 151
*Pixel Depth - 8 bits/pixel (grayscale) IMGBPP8 152
Pixel Depth - 1 bit/pixel (B&W) IMGBPP1 152
*Don’t Sharpen Edges IMGEDG0 152
Sharpen Edges (0-23) IMGEDG## 152
*File Format - JPEG IMGFMT6 153
File Format - KIM IMGFMT0 152
File Format - TIFF binary IMGFMT1 152
File Format - TIFF binary group 4, compressed IMGFMT2 152
File Format - TIFF grayscale IMGFMT3 152
File Format - Uncompressed binary IMGFMT4 153
File Format - Uncompressed grayscale IMGFMT5 153
File Format - BMP IMGFMT8 153
*Histogram Stretch Off IMGHIS0 153
Histogram Stretch On IMGHIS1 153
*Noise Reduction Off IMGFSP0 154
Noise Reduction On IMGFSP1 154
Invert Image around X axis IMGNVX1 153
Invert Image around Y axis IMGNVY1 153
Rotate Image none IMGROT0 154
Rotate Image 90° right IMGROT1 154
Rotate Image 180° right IMGROT2 154
Rotate Image 90° left IMGROT3 154
JPEG Image Quality (0-100) *50 IMGJQF### 154
*Gamma Correction Off IMGGAM0 155
Gamma Correction On (0-1000) IMGGAM### 155
Image Crop - Left (0-640) *0 IMGWNL### 155
Image Crop - Right (0-640) *639 IMGWNR### 155
Image Crop - Top (0-480) *0 IMGWNT### 155
Image Crop - Bottom (0-480) *479 IMGWNB### 155
Image Crop - Margin (1-238) *0 IMGMAR### 156
Protocol - None (raw) IMGXFR0 156
Protocol - None (default USB) IMGXFR2 156
Selection
Setting
* Indicates default
Serial Command
# Indicates a
numeric entry
Pag
e