Vuquest 3320g User Guide 153
• 4FUncompressed binary (upper left to lower right, 1 pixel/bit, 0 padded end of
line)
• 5FUncompressed grayscale (upper left to lower right, bitmap format)
•6FJPEG image (default)
• 8FBMP format (lower right to upper left, uncompressed)
H - Histogram Stretch
Increases the contrast of the transmitted image. Not available with some image
formats.
•0HNo stretch (default)
• 1HHistogram stretch
I - Invert Image
Invert image is used to rotate the image around the X or Y axis.
• 1ixInvert around the X axis (flips picture upside down)
• 1iyInvert around the Y axis (flips picture left to right)
IF- Noise Reduction
Used to reduce the salt and pepper noise in an image.
Example of Histogram Stretch at 0H: Example of Histogram Stretch at 1H:
Example of image
with Invert Image set to
1ix:
Example of image not
inverted:
Example of image
with Invert Image set
to 1iy:
To Next Page
Loading...
