Honeywell Vuquest 3330 User Manual

Vuquest 3320g User Guide 185
Single Scan Data Format Change Single Scan-Primary
Data Format
VSAF_0 83
Single Scan-Data Format 1 VSAF_1 83
Single Scan-Data Format 2 VSAF_2 83
Single Scan-Data Format 3 VSAF_3 84
External Input/Output
External Input *External Trigger Control Off EXTTRG0 85
External Trigger Control On EXTTRG1 85
*External Trigger Polarity High EXTTPO1 86
External Trigger Polarity Low EXTTPO0 86
External Output *External Illumination Control Off EXTILL0 88
External Illumination Control On EXTILL1 89
Symbologies
All Symbologies All Symbologies Off ALLENA0 92
All Symbologies On ALLENA1 92
Codabar Default All Codabar
Settings
CBRDFT 93
Off CBRENA0 93
*On CBRENA1 93
Codabar Start/Stop Char. *Don’t Transmit CBRSSX0 93
Transmit CBRSSX1 93
Codabar Check Char. *No Check Char. CBRCK20 94
Validate, But Don’t Transmit CBRCK21 94
Validate, and Transmit CBRCK22 94
Codabar Concatenation *Off CBRCCT0 94
On CBRCCT1 94
Require CBRCCT2 94
Codabar Message Length Minimum (2 - 60) *4 CBRMIN## 95
Maximum (2 - 60) *60 CBRMAX## 95
Code 39 Default All Code 39
Settings
C39DFT 95
Off C39ENA0 95
*On C39ENA1 95
Code 39 Start/Stop Char. *Don’t Transmit C39SSX0 95
Transmit C39SSX1 95
Selection
Setting
* Indicates default
Serial Command
# Indicates a
numeric entry
Pag
e

Honeywell Vuquest 3330 Specifications

General

Brand	Honeywell
Model	Vuquest 3330
Category	Scanner
Language	English