Honeywell Vuquest 3330 - Page 204

188 Vuquest 3320g User Guide
GS1-128 Default All GS1-128 Settings GS1DFT 110
*On GS1ENA1 110
Off GS1ENA0 110
GS1-128 Message Length Minimum (1 - 80) *1 GS1MIN## 110
Maximum (0 - 80) *80 GS1MAX## 110
Telepen Default All Telepen
Settings
TELDFT 111
*Off TELENA0 111
On TELENA1 111
Telepen Output *AIM Telepen Output TELOLD0 111
Original Telepen Output TELOLD1 111
Telepen Message Length Minimum (1 - 60) *1 TELMIN## 111
Maximum (1 - 60) *60 TELMAX## 112
UPC-A Default All
UPC-A Settings
UPADFT 112
Off UPAENA0 112
*On UPAENA1 112
UPC-A Check Digit Off UPACKX0 112
*On UPACKX1 112
UPC-A Number System Off UPANSX0 113
*On UPANSX1 113
UPC-A 2 Digit Addenda *Off UPAAD20 113
On UPAAD21 113
UPC-A 5 Digit Addenda *Off UPAAD50 113
On UPAAD51 113
UPC-A Addenda Required *Not Required UPAARQ0 114
Required UPAARQ1 113
UPC-A Addenda
Separator
Off UPAADS0 114
*On UPAADS1 114
UPC-A/EAN-13 with Extended
Coupon Code
*Off CPNENA0 114
Allow Concatenation CPNENA1 114
Require Concatenation CPNENA2 114
Coupon GS1 DataBar Output GS1 Output Off CPNGS10 115
GS1 Output On CPNGS11 115
UPC-E0 Default All UPC-E
Settings
UPEDFT 115
Off UPEEN00 115
*On UPEEN01 115
Selection
Setting
* Indicates default
Serial Command
# Indicates a
numeric entry
Pag
e