Honeywell Vuquest 3330 - Cleaning the Window

190 Vuquest 3320g User Guide
EAN/JAN-8 Check Digit Off EA8CKX0 121
*On EA8CKX1 121
EAN/JAN-8 Addenda *2 Digit Addenda Off EA8AD20 121
2 Digit Addenda On EA8AD21 121
*5 Digit Addenda Off EA8AD50 122
5 Digit Addenda On EA8AD51 122
EAN/JAN-8 Addenda Required *Not Required EA8ARQ0 122
Required EA8ARQ1 122
EAN/JAN-8 Addenda
Separator
Off EA8ADS0 122
*On EA8ADS1 122
MSI Default All MSI Settings MSIDFT 123
*Off MSIENA0 123
On MSIENA1 123
MSI Check Character *Validate Type 10, but Don’t Transmit MSICHK0 123
Validate Type 10 and
Transmit
MSICHK1 123
Validate 2 Type 10 Chars, but Don’t Transmit MSICHK2 123
Validate 2 Type 10 Chars and Transmit MSICHK3 124
Validate Type 11 then Type 10 Char, but Don’t
Transmit
MSICHK4 124
Validate Type 11 then Type 10 Char and
Transmit
MSICHK5 124
Disable MSI Check Characters MSICHK6 124
MSI Message Length Minimum (4 - 48) *4 MSIMIN## 124
Maximum (4 - 48) *48 MSIMAX## 124
GS1 DataBar Omnidirectional Default All
GS1 DataBar Omnidirectional Settings
RSSDFT 125
Off RSSENA0 125
*On RSSENA1 125
GS1 DataBar Limited Default All GS1 DataBar Limited Settings RSLDFT 125
Off RSLENA0 125
*On RSLENA1 125
GS1 DataBar Expanded Default All GS1 DataBar
Expanded Settings
RSEDFT 125
Off RSEENA0 126
*On RSEENA1 126
GS1 DataBar Expanded Msg.
Length
Minimum (4 - 74) *4 RSEMIN## 126
Maximum (4 - 74) *74 RSEMAX## 126
Selection
Setting
* Indicates default
Serial Command
# Indicates a
numeric entry
Pag
e